How to Setup and Install ZOSI 24CH 4K PoE Security Camera?

The ZOSI 24CH 4K PoE Security Camera system offers advanced surveillance capabilities, and its installation involves a combination of hardware setup and software configuration. This comprehensive guide will walk you through the process to ensure a seamless and effective setup.

Before You Begin

Before initiating the installation process, carefully review the contents of the ZOSI 24CH 4K PoE Security Camera system. Ensure that you have all the necessary components, including the NVR (Network Video Recorder), cameras, PoE (Power over Ethernet) cables, BNC cables, mounting screws, power supplies, and a quick start guide.

Plan the locations for your cameras, taking into account factors such as power accessibility, viewing angles, and weather conditions.

Hardware Installation

1. Connect the NVR:

• Position the NVR near your router and connect it to the power supply using the provided adapter.
• Use an ethernet cable to establish a connection between the NVR and your router.

2. Connect the Cameras:

• Mount the cameras in your selected locations using the screws and brackets provided.
• Unlike traditional systems, PoE cameras eliminate the need for separate power supplies. Connect each camera directly to the NVR using a single PoE cable, providing both power and data transmission.
• Ensure that the PoE cable length is sufficient to reach the camera without exceeding the recommended distances (typically around 300ft).

3. Connect a Monitor (Optional):

While not mandatory for the initial setup, you can connect a monitor to the NVR's HDMI port using an HDMI cable (not included) to view live camera feeds during configuration.

Software Setup

Step 1 - Power On the NVR: Switch on the NVR and allow it to boot up.

Step 2 - Configure NVR Settings: Utilize the included mouse to navigate through the NVR's on-screen menus. Follow on-screen prompts to set language, time zone, recording settings, and other preferences.

Step 3 - Add Cameras to the NVR: This may involve a search function within the NVR menu or manually entering camera IDs. Consult the quick start guide or the ZOSI support website for model-specific instructions.

Step 4 - Download and Install the ZOSI Smart App:

Retrieve the app from the App Store or Google Play. Create an account or log in if you already have one.

Step 5 - Add the NVR to the ZOSI Smart App: Launch the app and follow in-app instructions to add your NVR, usually involving scanning a QR code on the NVR or entering its ID and password.

Remember, these steps are general guidelines. For precise and up-to-date instructions, consult the official ZOSI resources and the quick start guide included with your specific ZOSI 24CH 4K PoE model. If you encounter any challenges during installation, don't hesitate to reach out to ZOSI customer support for expert assistance.